View SSC-YGHR411-H_1316659.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

*Customer:
SPECIFICATION
ITEM MODEL REVISION No. CHIP LED DEVICE SSC-YGHR411-H
[Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Characteristic diagram 5. Soldering profile 6. Outline dimension 7. Packing 8. Reel packing structure 9. Precaution for use
Drawn by
Checked by
Approved by
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-YGHR411-H Seoul Semiconductor
- 1/7 -
1. Features
Package : 1.6x1.5x0.5mm Untinted, Diffused flat mold Wavelength : 572(Yellow-green), 620(Red)
2. Absolute Maximum Ratings Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature Symbol Pd IF IFM*1 VR Topr Tstg Value 72 30 60 5 -30 ~ +85 -40 ~ +100
(Ta=25) Unit V
*1 IFM conditions: Pulse width Tw 0.1ms, Duty ratio 1/10
3. Electro-optical Characteristics Parameter Forward Voltage Reverse Current Luminous Intensity*2 Wavelength Spectral Bandwidth Viewing angle*3 Symbol VF IR IV
D
(Ta=25) Condition IF=20 VR=5V IF=20 IF=20 IF=20 IF=20 Color YG Red YG Red YG Red YG Red YG Red YG Red Min 30 50 Typ 2.1 2.1 572 620 30 30 150 150 Max 2.4 2.4 10 10 Unit V mcd
2
1/2
*2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity.
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-YGHR411-H
- 2/7 -
4. Characteristic Diagram
Forward Current vs Forward Voltage
100
Relative Intensity vs Forward Current
140 120
Forward Current IF(mA)
Relative Intensity IV(%)
10
100 80 60 40 20
1
0.1 1.8
1.9
2.0
2.1
2.2
0
5
10
15
20
25
30
35
Forward Voltage VF(V)
Forward Current IF(mA)
Forward Current Derating Curve
25
Radiation Diagram
20
90
Forward current IF(mA)
.0 .8 .6 .4
150
120
60
15
10
30
5
.2
0 -25 0 25 50 75 100
.0
180
0.5
Ambient temperature Ta()
0.5
0
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-YGHR411-H
- 3/7 -
5. Soldering Profile Reflow Soldering Conditions/ Profile (1) Lead Solder -Preliminary heating to be at 150max. for 2 minutes max. -Soldering heat to be at 240max. for 5 seconds max.
LED Surface temperature
C Operation heating 240
150
~
Pre-heating
Temperature rise: 5C/sec.
Cooling: -5C/sec.
120
0 60 to 120 sec. 5sec. max
(2) Lead Free Solder -Preliminary heating to be at 150max. for 2 minutes max. -Soldering heat to be at 260max. for 10 seconds max.
LED Surface temperature C Operation heating 260
150 ~ 120 0
Pre-heating
Temperature rise: 5C/sec.
Cooling: -5C/sec.
60 to 120 sec.
10 sec.
(3) Hand Soldering conditions -Not more than 3 seconds @MAX280, under Soldering iron. SSC-YGHR411-H
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 4/7 -
6. Outline Dimension
Tolerance: 0.2, Unit:
Cathode
YG
Amber
Anode
7. Packing
2.0
1.75
+0.1 -0 0.05
0.05
4.0 1.5
0.1
0.1
Tolerance: 0.2,
0.2
0.05
Unit:
1.75
0.05
3.5
4.0
0.1
0.5
0.05
1.73
0.05
(2.75)
8.0
0.2
0.7 0.05
180 +0 -3
11.4 9
0.3
2 0.2
+0.2 -0
22 13
0.2
Label
(1) Quantity : 4000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10pitches to be 0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-YGHR411-H
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 5/7 -
60
8. Reel Packing Structure
Reel
PART NO. : ########## PO NUMBER : ######## QUANTITY : 4,000 LOT NUMBER : ########## SSC PART NUMBER : SSCYGHR411
Aluminum Vinyl Bag
PART NO. : ########## PO NUMBER : ######## QUANTITY : 4,000 LOT NUMBER : ########## SSC PART NUMBER : SSCYGHR411
Outer Box
*Material: Paper(SW3B(B)) a 7inch 245 c
CHIP LED
PART : SSCYGHR411 CODE : Q'YT : 40,000EA
TYPE
SIZE(mm) b 220 c 142
CHIP LED b a
LOT NO : DATE :
SEOUL SEMICONDUCTOR CO.,LTD
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-YGHR411-H
- 6/7 -
9. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5~30 (2) Attention after opened However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. Temperature : 5 ~ 40 Humidity : less than 30% b. Keeping of a fraction Humidity : 60%HR max.
(3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 605. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 805 or 12Hr at 1005. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. (15) Static Electricity and surge damages the Blue/Green LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be properly grounded. (16) It is recommended to use individual resistor separately when the LEDs applies in parallel circuit so that it may improve the light deviations. (17) It is recommended to examine to the full the circuit by using resistor when the LEDs applies in case of lighting seven colors. SSC-YGHR411-H
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 7/7 -

▲Up To Search▲

Price & Availability of SSC-YGHR411-H

	To Download SSC-YGHR411-H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .